||With universal attachement less than 10 minutes
|Single Operator Control
||Component weight about 16kg. Handy terminal user guidance and text in clear
|Universal Actuator Unit
||Installation on driver seat. No modifications to the vehicle. The actuator unit is temperature proof from -40°C up to +80°C and designed for endurance tests. Minimum self warm up. Aerodunamically neutral design for climatic measurements.
||AUTOPILOT systems are assignable to several test stands. Different actuator units can be operated on one test cell.
|Praxis Oriented Software
||Teach-in of the gear positions with commands in dialog (check list). Comfortable user interface with simple operation. Drive cycles can be defined without programming experience.
||Once per vehicle type an self learn cycle has to be performed. This cycle is independent to the drive cycle to run. During this automated learn cycle the AUTOPILOT learns all relevant parameters that are required to drive the vehicle and any drive cycle.
|Continual Learning od Clutch Behavior
||Correct start point over the whole test period. Compensation of wear & tear during the complete ensurance test. Automatic adaptation to the true bite point of the clutch.
|Constant Control Algorithm During Test Drive
||Ideal driver for correlation, research, development, and quality control.
|Highest level of safety
||Safe non-energized basic positions. The clutch pedal is disengaged and the accelerator pedal is released. Emergency-off button on actuator unit. 24V technique on actuator unit. Skid monitoring on the wheels (Wheel drum slip monitoring and compensation). Gear shifts forces may be programmed. Safety tolerance band monitoring (speed errors). Permissible repetitions of a shift process may be preset. Speed and engine speed monitoring
||Local data managers for vehicle data, drive sycles, shift tables. Networking capable.
|Support of various transmission types
- column shifter (optional)
- Standard, sequential, each with/without clutch
||Digital interface to emission benches with digital outputs and inoputs. Optionally different interfaces for host computer communication: AK+SCPI (serial or TCP/IP) Bit parallel + analog
||Directly accessible standard drive cycles. Drive cycle files can also be created as ASCII files in different file formats. Instructions from host computer systems can be executed in different operational modes. Drive cycles can contain additional data as road gradient commands, sub cycles, control commands, etc.
|Human driving style
||Speed control algorithm with human driving style. Choice if different human driver models for emission tests. Highly accurate and repeatable control.
Closed loop control modes for:
- Vehicle speed
- Engine speed
- Throttle traces
- Clutch traces
- External unit as intake manifold pressure, force/torque, etc.
- Reproduction of recorded tracks with max. 10Hz
||Different manual operation modes to drive and operate the vehicles via keyboard or handy terminal
Actuator unit SAP2000:
- Total Weight ca. 33kg
- Component Weight max. 16kg
- Motor Voltage 24V
- Operating Temperature -40°C ... +80°C
- Shift (X+Y)
- Ignition key (optional)
Power controller 19" unit, 2x3 RU, power consumption 600Watt, 115/320VAC, voltage selector
Industrial - PC system with plug in boards
|System extensions (exact)
- Gear stick release mechanism
- Shift force measurement
- Pedak force measurement
- Column shifter
- Keyboy SBE to acurate ignition key
- Keyboy SBX to acurate ignition key
- Steering wheel ficture
- Adapter to column shifter (N-D Positions only)
- Adapter for hard link to gear stic (screwed connection)
- Vehicle motion switches
Host computer communication:
- AK++ SCPI (serial or TCP/IP)
- Bit parallel + analog
- Windows GUI
- Vehicle datd stack module
- 19" - cabinets
- Opto coupler module for digital I/O's
- Vehicle engine speed measurement
- 5th wheel sensor to measure roller surface velocity
- Data acquisition and monitoring
- Correlation package: All components permanently installed in vehicle
- Custom modifications
|System Configurations and complete packages
||A wide range of options allows to configure the system exactly to the purpose of its application, as a non-supervised fully automated endurance testing with automated refueling. Different system packages, including versiong with reduced control features or reduced volume of functions are available for different applications and requirements.