PWB Repairing System

PWB (Printed Wiring Board) Repair Station System


 

This PWB Repair Station shows the best equipment for repairing fine wire patterns using an Avio Transistor type Welding Power Supply.

  • This system welds a very fine lead wire to the substrate using a parallel gap welding process.  System components include:
  1. Transistor Type Welding Power Supply, MCW-700
  2. System Head, NA-131 or NA-132
  3. Manual Drive, NA-231
  4. ELP Base, NA-311
        Base Dimensions: W760×D760×H238 mm
  5. Microscope Set

* In addition to the above, a flexible 300mm long Weld Cable Set (SFC-22-300-DD-97) and Actuator Cable (SH-TR-500) are required.

ELP-696
Welding Electrode
EP-711-00F,02
EP-406-00F,02
Electrode Stroke
Max. 19mm
Electrode Gap
0-1mm
Pressure Range
60-1000g
PWB Size
Max. 630 x 630mm
Heat Control
Current
10-1800A
Voltage
0.01-4V
Power
10-3600W
Welding Time
UP
0.9.9ms
WELD
0.1-9.9ms
DOWN
0-9.9ms
STEP
0.1ms
Control Mode
Constant Current, Constant Voltage, Constant Power
Welding Conditions
15
Microscope
x 3.5-30
Power Source
AC100V   ±10%   50/60Hz   15A
Dimensions
760(W) x 760(D) x 673(H)mm
Weight
60kg

 Product Literature