Temperature and Displacement Control

Quick overview

TCW-DP100: Ultimate Pulse Heat Controller! Temperature Control with Displacement Control

High Precision Displacement Control

Overtravelling amount is controlled by feedback of displacement amount in 1μm resolution, and uniform melting amount can be realized

Digital Temperature Control

High speed and highly accurate temperature control is realized by the digital PID control method, making the unit suitable for fine wires and micro-miniature works

Release Function

After heating, the solder thickness between the works can be secured

Four Stage Heating

Various temperature profiles are realized to cope with the diversified applications

Built-in Motor Control Function

User Interface

RS-232C&I/O is standard equipped making the unit easy to interface with the external equipment such as the case of incorporating in an automated system

  • Temp. Profile
  • Heater Tip Position Profile
  • Displacement Profile


  • Precise Control of Displacement
  • Temperature Detection of Reflow Point
  • Multiple Monitoring of Parameters
  • Simple Operation using Jog Dial

Micro Coaxial Cable

Reflow Point Control

  • No spread Wire (Damage Reduction)
  • No Solder Bridge

Solar Panel Module

Joint Gap Control

  • Improvement of Joining Strength
  • Reducing of Residual Stress


Items Specifications
Heating Temperature Room Temperature - 600°C in 1°C step, E type/J type (option) Roomtemperature - 900°C, K type (option)
Heating Time 0.00 - 99.99 seconds
Power Rating 750 VA, 50% duty cycle
Heating Steps 4 steps
Monitor Displacement, Temperature, Work height
Motor Resolution 1µm / pulse
Displacement Resolution 1µm
Interface RS-232C, I/O
Transformer Built-in
Tap Voltage 0.88 V, 1.24 V, 1.75 V, 2.47 V, 3.5V
Power Source AC 200 - 240 V ±10%, 4 φ, 50/60Hz, 15A
Dimension 220(W) x 400(D) x 320(H) mm
Weight 23kg

Displacement Power Supply Setup and Programming

Call for pricing

Additional information